Wednesday, June 3, 2009

Six piece sari petticoat


Measurements needed
Waist
Hip- measured around the widest part of the hip. Usually 7” or 8"
below the waist line.
Full length
Width of the waist band.
Instructions for drafting
Line A-F should fall on the fold
A-F= full length –Waist band width .
Mark point D on A-F such that A-D =7 “or 8”
Draw perpendiculars from A, D and F
A-B =1/8 waist +1/2”
A-C =1/2 “
D-E =1/8 hip + ½”
Join B-E and produce. This line meets the perpendicular drawn from F at G.
G-H =1/2”
Shape B-C and F-H
Cut along C-B-H and F
Cut along the folding line C-F and separate the sheets.

Layout 




Fold the material twice, making 4 layers. Place the paper draft on the cloth as shown in the figure B and cut.

Parts



 



We get 6 panels 2 central panels, 2 right side panels and 2 left side panels as shown in figure C

Stitching 







Join the side panels to the central panel. 2-8 to 3-9, 4-10 to 5-11. Do the same thing to the other set .We get 2 pieces A and B, one set for back and the other for front. as shown in the figure D

Now we have to join front to back.Keeping right sides together join front to back. Join 1-5 to 4-8. On the other side keep an opening of 6”. Join9-6 to 10-7.Do not stitch the portion 2-9 and 3 -10 together.Turn them inside and stitch separately. This is the side opening.

waist band



Measure the top of the petticoat (waist line) and cut a waist band ABCD 6” wide and length equal to the top of the petticoat + I”. Fold ½” on ends A-C and B-D of the waist band and stitch. Fold ½” along A-B and C-D and crease Open the side A-B and attach it to the petticoat top from inside. Keep right side of the band and the wrong side of the petticoat together and stitch on the crease made earlier .Fold the band length wise stitch the edge C-D to the waist line so that the fold just covers the machine stitching at the waist line. Turn the bottom of the petticoat by 1” and stitch.-Run a draw string along the waist band.